Due to the regular use of the saw, the blade became blunt and damaged. And to get a flawless cut, you need to change the blade.
Actually a blunt blade causes damage to your cutting materials. So, why do you carry a blunt or damaged blade when you are using the best brand, Black and Decker? I guess you don’t want to carry your damaged blade. Right? If so, then you are going to get your solution!.
You know the blade is a crucial thing for a circular saw. If any fault occurs in the blade, the saw ultimately becomes a useless tool.
And there is the reason that no one would want to leave such an important thing unchanged. Just like you!
That’s why I will try to give you a complete guideline on how to change the blade on Back and Decker cordless circular saw in this article.
Let’s begin.
An ultimate guide to change Black and Decker cordless circular saw blade
The process to change a circular blade saw is really a simpler task than any other repair of the saw. However, you need to be more careful because you deal with the blade of the circular saw. And it approximately takes 10-15 minutes to change the blade.
Before starting the process, you need some tools that will make the task easier for you. Let’s see what you need to complete the task.
Required tools:
- A new circular saw blade
- A socket wrench
- Hand gloves
- Goggles
Now, it’s time to change the blade. Follow the steps outlined below to change the blade of your Black and Decker cordless circular saw.
Steps to follow:
Step 1: As it is a cordless circular saw, remove the saw battery first. After that engage the blade guard.
Step 2: Now, lock the blade by pressing the saw blade lock bar. After locking the blade check it again by using a wrench.
Step 3: Take a socket wrench and place it into the center nut of the blade. Turn the socket wrench clockwise to remove the center nut.
When the nut becomes loose, bring it out. Remove the washer also. Keep the nut and washer in a safe place for reinstallation.
Step 4: Disengage the blade guard and remove the blade from the saw. After removing the old blade, clean the blade guard to remove sawdust from it.
Step 5: Take the new blade and check the arrow of the blade to install it properly. All the blades have a rotation direction on the blade sticker.
If you don’t find the arrow, just point the blade teeth forward. It will give you the right direction to install the blade.
Step 6: Now, place the new blade and engage the saw blade guard. Replace the washer and nut in their previous position. Tighten the nut with the socket wrench. Unlock the saw blade lock and replace the battery.
That’s all about changing the blade of your Black and Decker cordless circular saw blade.
How To Choose A Perfect Saw Blade
Before buying the new blade, you need to focus on a few things to get the perfect blade for your saw. Let’s have a look at those things.
- The diameter of the blade: You will find the diameter of the blade at the sticker attached to the blade. Sometimes it is also written as the size of the blade.
If you don’t find the diameter of the blade, just remove the blade and measure from one side to another side by using a measurement tape.
- The arbor diameter of the saw: Before buying the new blade, always take the measurement of the circular saw arbor. The arbor helps to fit the blade properly with the saw.
The diameter of the arbor is always printed on the sticker of the blade or in the saw. If you don’t find it, just measure the arbor diameter after removing the blade.
- The RPM: If you are a regular saw user, you are surely familiar with the RPM. RPM means revolutions per minute.
Each saw and blade has an RPM rate and before buying the blade, make sure that the new blade RPM rate doesn’t exceed the saw RPM rate.
Cautions
- Don’t forget to wear hand gloves when doing any repair with the blade.
- Engage the blade lock properly to avoid any kind of unwanted injury.
Final verdict
Now, I think you know now the changing process of the blade of your Black and Decker cordless circular saw blade. This is actually not a big deal to change the blade.
You don’t need any technician to change the blade. Do this by yourself and save the annual maintenance expense of your circular saw.
Hopefully, this article gave you a clear idea of how to change the blade on Black and Decker cordless circular saw.
Give us your feedback! It is precious to us.
